When the first bit reaches the host B, which bit is exit from the host A?
Posts published in April 2020
I have a number of UDP packets that are using a protocol that is not implemented in wireshark. I would like to use the I/O graph to plot the value of the data packet byte at index 3. Is this possible?
I have tried setting up a plot with Y...
The U.S. Department of Energy’s plan to dilute and dispose of 34 metric tons of surplus plutonium in the Waste Isolation Pilot Plant (WIPP) in New Mexico is technically viable, provided that the plan’s implementation challenges and system vulnerabiliti...
“Reports & Events” is a monthly tip sheet for the news media that highlights selected meetings of interest and reports from the National Academies of Sciences, Engineering, and Medicine.
If you want to work with occupational rehabilitation specialists who make people their number one priority then you’ve come the right place. Strive successfully delivers quality…
Hey Reddit. I'm making a little switch that has two physical buttons that you click to trigger IFTTT recipes. I'm really hoping for good battery life, and I don't really need a whole lot of sensors. A small form factor is crucial though, as I want it to be something you could put on a shelf and not notice like a huge lump. What should I go with?
submitted by /u/scat234
[link] [comments]
We are in the process of deploying a vehicle tracking solution. We bought GOSWOX server and got that set up and working pretty well by using just cell phone apps to send location. Now, we would like to start buying actual hardware trackers. The problem...
I have to design a network where there are 4 within which are different number of VLANs with varying number of hosts per VLAN depending on the building.
My confusion lays in the main router, does it have to be in a subnet all of its own?
...
I’m going to install Home Assistant Operating System using VirtualBox on Windows. It may sound complicated, but it is not and I will show you everything step-by-step. I decided to move my Home Assistant installation from raspberry to a desktop PC...
I don't understand exactly when an ACL will get applied when on an SVI. Given the following (pseudo) configuration
int vlan 100
ip address 10.0.0.1 255.255.255.0
ip access-list in in
ip access-list out out
int gig 1/2
switchport ...