We need to capture LACP PDUs on a member link of an aggregated bundle link on Juniper MX connected with other router via DWDM link and save the output in .pcap format using write-file ****.
Can someone help us to show how to use 'monitor t...
Posts published by “NABEEL NASIR”
I am observing 'PE route down message ' against LDP based VPLS connection on Juniper MX. The IGP protocol is IS-IS. LDP VPLS connectivity is point to point (having only two end points).
When I check status of LDP VPLS for some instance w...
We have to enable 'chained-composite-next-hop' on Juniper MX series routes in our network. We have already enabled **** 'enhanced-ip' on MX series. Is the **** 'chained-composite-next-hop' enabled by default on Juniper MX series? Please co...
I want to apply rate limit on Main Aggregated Interface (AE) without applying on unit level. We have a customer connected with our Juniper MX480 via 100G Interface. The single 100G interface is a part of bundle link ae23. There are 2 x sub...
I am facing a very strange issue with regard to IS-IS Interface Metric / Cost calculation in Juniper MX. We have configured a reference bandwidth of 1000G on all routers.This by definition means an ae interface (with 2 x 10G member Links) ...
With respect to Juniper Networks , what is the difference between ‘Fabric Plane and ‘Switch Fabric’?
I am struggling with the concept of 'Fabric Plane' and 'Switch Fabric'? I haven't found any clear cut difference between them? Why fabric planes are different in MX960 compared with MX240 and MX480. How SCB effect throughput?
I am quoting...