Press "Enter" to skip to content

BFD issue with BGP support on Cisco 9396PX

Last updated on July 21, 2020

        I have following BGP configuration and trying to reduce my convergence time with help of <code>BFD</code> but having hard time.
router bgp 1111
  log-neighbor-changes
  address-family ipv4 unicast
    network 22.22.22.0/24
  neighbor 11.11.11.1
    bfd
    remote-as 2222
    update-source loopback160
    ebgp-multihop 2
    address-family ipv4 unicast
      send-community
This is what i did to enable BFD
feature bfd
bfd interval 500 min_rx 500 multiplier 5
bfd echo-interface loopback160
!
router bgp 1111
  neighbor 11.11.11.1
    bfd
Now when i run (no output), that means BGP isn't registered to BFD, if i enable OSFP then i can see some output in show bfd neighbors command. I tried debug and no output in debug logs. trying to understand why BGP not getting registered. (My peer ISP did enabled BDF their side) my nxos version is 7.0(3)I4(7)
# show bfd neighbors
#

Be First to Comment

Leave a Reply

%d bloggers like this: