I am trying to ping a device with IP 192.168.0.200, subnet mask 255.255.255.0. It is configured with gateway adress 192.168.1.1.
Is it because the gateway subnet, and ip adress subnet is different i am not able to ping it?
Yes ping is enab...
Posts published in “Computer & Internet”
Our tennis club has a brand new Samsung TV and it refuses to connect to the club's two wifi networks.
One of these wifi networks is used by members so it may have run out of IP addresses. But the other is the office wifi network so it shou...
When sending UDP packets that exceed the PMTU, I'm told that the receiver will receive the packets in fragments. Does the network interface or OS of the receiver typically re-assemble the packets automatically?
If I had to guess, for Linux...
I'm segmenting my network into a home, work, guest, and IoT. I have already set up the guest’s network because, on the router's page, there is a section for it. However, I spent an awful amount of time looking for information on how to do ...
In Port-security configuration,
port-security mac-address sticky-config xxxx-xxxx-*** vlan x
port-security mac-address sticky xxxx-xxxx-*** vlan x
1.All of them do not disappear after SW restarting. What's differences between the two comm...
Beginner on networking question: I can read cover to cover books on pure mathetmatics but computer books are so verbose that they put me too sleep. They never get to the point and are filled with constat repetition. So to get to the point,...
We have a requirement where we need 5 x Gigabit ports and 1 x 10 Gigabit port but need it to be installed inside our own enclosure (with a bunch of other components), along with an extended operating temperature range.
One of the only off ...
I have been getting random intermittent internet connections on few particular devices. Let us call these PC1, PC2 and Mobile1. PC1 and PC2 are wired connections and Mobile1 uses wireless connection. Both PCs run linux and I ran a test on ...
I understand why two computers need a crossover cable between themselves to communicate. Without it, the transmit and receive wires are the same on each end, making any communication impossible. What I don't understand is if I have a regul...
There are articles explaining the PIM-DM mechanics, and they only confused me. Considering the most common topology, that of three routers, connected to each other like a triangle as such:
R1 -- R2
\ /
R3
And assuming that R1 is th...