Press "Enter" to skip to content

A small knowledge of ultra-thin resin cutting sheets

customized metal cutting disc


There is a lot of knowledge about ultra-thin resin cutting sheets, but for those of us who don’t touch these things, we only need to know some furs. Below we will introduce some tips for you. I hope you can find out and maybe help in the future. you.
1. Store the resin customized metal cutting disc in a place where there is no direct sunlight, no moisture, and place it horizontally;
2. The side of the resin cutting sheet cannot be used;
3. The fixed object is firmly fixed;
4. Use the correct ******. No enhancement: 1/3 or more; there is enhancement: 1/4 or more;
5. If the inner diameter of the resin cutting piece is small and the device does not match, please do not change the hole diameter of the grinding wheel.
6. Before starting to use the ultra-thin resin cutting piece, please use it for one minute and then use it. When replacing the new type of resin cutting piece, please idle for 3 minutes before using it.
7. Wear protective glasses, masks, earplugs, gloves, dustproof clothing;
8. In the high-use peripheral speed of the ultra-thin resin cutting piece, the use of the high number of revolutions; 9. Using an angle grinder with a safety cover, a cutting machine with a safety cover;
10. Confirm that the resin cutting piece has no missing edges, no cracks, no cracks, etc. before use;

Be First to Comment

Leave a Reply

%d bloggers like this: