Press "Enter" to skip to content

How optical lenses work

The main purpose of the large size YVO4 laser crystal is to supply power to the light source, control the brightness of the light source and control the illumination state of the light source (bright\off). It can also achieve the strobe of the light source by triggering the signal to the controller, thereby greatly extending the life of the light source. Commonly used controllers on the market include analog controllers and digital controllers. The analog controllers are manually adjusted, and the digital controllers can be remotely controlled by a computer or other device.
Simply put, the main function of the light source controller is to receive various predefined commands and setting parameters sent by the PC host, and process it through the main controller, and then control the LED light source through the driving circuit to realize digital PWM dimming according to the setting.
The high precision YVO4 laser crystal can be divided into a software part and a hardware part according to the architecture, wherein the software part can be further divided into a Pc end user interface application, a USB driver, and a controller hardware firmware. The hardware part can be divided into a main control module and an LED drive module. The main control module is mainly responsible for communication with the PC, command response, and transaction management. It is the core part of the entire controller. The LED driver module mainly provides a suitable driving method for the LED light source. The driving methods commonly used for LED light sources are inductive driving and charge pump driving, wherein the inductive driving circuit is suitable for driving several LEDs connected in series.
Selection guide:
The selected light source controller should select different types of controllers according to different actual conditions.
For example, according to the output voltage requirements, 5V, 12V, 24V, 28V (brightening) can be selected;
Optional manual, software and manual according to controller requirements;
According to the requirements of the output channel, you must select one, two, three, and four.
The main purpose of the wholesale YLF laser crystal is to supply power to the light source, control the brightness of the light source and control the illumination state of the light source (bright\off), and also realize the strobe of the light source by demodulating the signal to the controller, thereby greatly extending the life of the light source. Commonly used controllers on the market include analog controllers and digital controllers. The analog controllers are manually adjusted, and the digital controllers can be remotely controlled by a computer or other device.

Be First to Comment

Leave a Reply