Tag: 125*1*22 EN12413 cutting disc

Cutting machine

5 inch resin cutting disc for metal The cutting piece is mainly classified into a fiber resin cutting piece and a 5 inch resin cutting disc for metal according to the material and is collectively referred to as a cutting piece cutting piece. Yongkang Jinlida Electromechanical Abrasives Factory is a manufacturer specializing in the production of cutting discs, specializing in the production of resin cutting…

High-speed grinding of cutting discs

  fiber cutting disc Chinese supplier High-speed grinding is a high-speed grinding in which the cutting speed of the cutting disc is Vs>45 m/s compared to the conventional grinding. As early as the 1960s, Vs has been increased to 60m/s, and in the 1970s it has increased to 80m/s. However, in the following decade, due to the limitation of the rotational speed of the cutting…

Matters needing attention when using portable electric cutting blades

125*1*22 EN12413 cutting disc   1. Select the cutting piece whose structural characteristics are in accordance with the material to be ground and the grinding property. Before use, perform a comprehensive performance check and then install it by a special person. 2. The adjustable cutting blade protective cover should be used to adjust according to work requirements at any time; the maximum exposed angle of…

Analysis of the causes of the quality of the cutting piece

1) Equipment tooling problems customized metal cutting disc equipment problems Production equipment is an important material condition for grinding wheel production. Some enterprises lack equipment, such as no boring machine, lack of mixing machine, less hydraulic tonnage specifications, etc. Second, equipment maintenance is poor, equipment can not be in In good condition, not only is production efficiency low, labor intensity is high, but product quality…