Tag: fiber cutting disc Chinese supplier

High-speed grinding of cutting discs

  fiber cutting disc Chinese supplier High-speed grinding is a high-speed grinding in which the cutting speed of the cutting disc is Vs>45 m/s compared to the conventional grinding. As early as the 1960s, Vs has been increased to 60m/s, and in the 1970s it has increased to 80m/s. However, in the following decade, due to the limitation of the rotational speed of the cutting…

The main quality problem of the cutting piece and its harm

    fiber cutting disc Chinese supplier   When the fiber-reinforced resin sheet cutting blade and the shaped flat cutting disc on sale are used, most of them are hand-held cutting and grinding, and the distance between the operator and the cutting piece is relatively close. Therefore, once the rotating strength is poor, the cutting piece is broken during the cutting or grinding process, which…

These reasons lead to low profit margins for cutting companies?

fiber cutting disc Chinese supplier     The market is weak, the competition between the peers is fierce, and the cutting-slice industry enterprises are faced with the dilemma of low profits. The comprehensive analysis is nothing more than the following reasons: 1. There is no sound market mechanism As is known to all, the flat cutting disc on sale industry is difficult to form a…

Analysis of the causes of the quality problems of cutting sheets

First, the raw material problem The aluminum flat cutting disc is a complex system composed of a variety of main and auxiliary raw materials, the main materials are abrasives and bonding agents, and the auxiliary materials include fillers, reinforcing materials and the like. 1. Abrasive problems: Abrasives are the main substances in the 5 inch resin cutting disc for metal for grinding. At present, the…

Cutting sheet safety requirements

1. The grinding machine must have the power required to grind under the maximum allowable load to ensure the normal operating speed of the spindle of the cutting blade. 2. The direction of rotation of the spindle thread of the cutting piece: the direction of the thread of the end of the aluminum flat cutting disc of the cutting piece for fastening the cutting piece…

Cutting part processing method

All aluminum flat cutting disc are relatively fragile and must be handled with care when handling. Should do: 1. The received cutting piece should be inspected immediately to confirm that the 5 inch resin cutting disc for metal is not damaged or cracked during transportation. 2. The support for the cutting piece must be firm. 3. Carefully transfer the cutting piece to the shelf. Not…