Press "Enter" to skip to content

The Diamond Cheap Grinding Disc Feed Speed

The diamond cheap grinding disc feed speed

The feed rate is the feed rate of the sawed stone. Its size affects the sawing rate, the force on the cheap grinding disc and the heat dissipation in the sawing area. Its value should be selected according to the nature of the stone being sawed.

Generally speaking, sawing the softer stone, such as marble, can increase the feed speed appropriately. If the feed speed is too low, it is more conducive to improving the sawing rate. The sawing of fine-grained, relatively homogeneous granite can increase the feed speed appropriately.

If the feed speed is too low, the diamond edge is easily soothed. However, when cutting granite with coarse grain structure and uneven hardness, the feed speed should be reduced. Otherwise, the vibration of the grinding wheel will cause the diamond to break and reduce the sawing rate. The cutting speed of sawing granite is generally selected within the range of 9m~12m/min.

Be First to Comment

Leave a Reply