Press "Enter" to skip to content

What details need to be paid attention to when using the grinding wheel

The grinding wheel manufacturer stated that in order to increase its safety factor when operating ultra-thin cutting blades, some details must be paid attention to. Today, let’s take a look at the details that need attention: before starting to use ultra-thin resin cutting blades, Please use it after one minute of idling. When replacing the new type of resin EN12413 cutting discs, please use it for 3 minutes after idling; be sure to use the correct ******. No enhancement: 1/3 or more; enhancement: 1/4 or more.
Use an angle grinder with safety cover, cutting machine with safety cover; be sure to fix the cut material firmly when using it; users must wear protective glasses, masks, earplugs, gloves, dustproof clothes, etc. Take protective measures. Store the resin cutting piece in a place where there is no direct sunlight, no moisture, and place it horizontally. If the inner diameter of the resin cutting piece is small and the equipment does not match, please do not change the hole diameter of the grinding wheel; The highest use cycle speed of the ultra-thin resin cutting piece is used up to the maximum number of revolutions; before use, it is confirmed that the resin cutting piece has no missing edges. No cracks, no cracks, etc.; the side of the resin cutting piece must not be used. Only the above operation is ultra-thin The details that should be paid attention to when cutting a piece can be added to the layer of protection for its own safety.
The cutting piece belongs to the grinding wheel and is made of abrasive and binder resin for cutting ordinary steel. Stainless steel metal and non-metal sheet. It is made of glass fiber and resin as reinforced bonding material with high tensile strength, impact resistance and resistance. Bending strength, widely used in ordinary steel. Stainless steel metal and non-metal production and cutting, excellent materials. Exquisite craftsmanship guarantees high cutting efficiency and best economic effect on different material workpieces. Grinding wheel China cutting disc for metal need to be used What issues to pay attention to:
1. When using the flat grinding wheel, be sure to first idling for 2~3 minutes before use, and it is forbidden to use it.
2. The bolt-fastened grinding wheel should ensure the flatness of the grinding wheel when it is used, and there is no attachment between the grinding wheel and the middle plate of the grinding wheel to avoid cracking during the use of the grinding wheel.
3. Reasons and hazards of forming a wave-shaped grinding surface when the grinding wheel is used:
Due to the uneven mixing of the grinding wheel during the mixing process, the internal structure of the grinding wheel is uneven, and the bonding agent is not well adhered. Due to the inconsistency of the grinding wheel in the grinding process, the corrugated grinding surface is formed, which directly affects the verticality of the grinding workpiece and Flatness.


Be First to Comment

Leave a Reply

%d bloggers like this: